Timing belt Movendis P-696-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-696-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-696-8M-480 and any equivalents.
The Movendis P-696-8M-480 is a curvilinear H-type timing belt with an HTD 8M profile, a 696 mm length and an 8 mm pitch. For a maintenance, engineering or purchasing professional, the profile and length are the two figures that decide whether this belt fits the drive. This page covers that belt only, identified by its part number.
The HTD 8M profile is a curvilinear tooth form, so the belt engages a matching 8M pulley rather than a square-tooth or trapezoidal one. The 8 mm pitch is the distance from one tooth center to the next; the 696 mm length is the belt's own length figure. Read together, they tell you this is a compact 8M drive, and the part number P-696-8M-480 carries both the profile and the length in its marking.
When you match an existing belt, the safest route is to read the marking on the back of the old belt and send that part number. If the marking is worn away, measure the length and confirm the tooth profile at the pulley, then send those figures. We carry the Movendis P-696-8M-480 and can confirm it against your drive details.
Send the part number by WhatsApp or email and the team replies promptly. If you are unsure of the exact belt, include the pulley tooth count, the belt width and the application so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 696mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The HTD 8M profile means a curvilinear tooth form that runs on 8M pulleys, and the 8 mm pitch is the tooth-to-tooth spacing. The 696 mm length is the belt length figure. Those three values, plus the belt width, are what you match to the drive.
- How do I confirm the Movendis P-696-8M-480 is the belt I need?
- Read the marking on the back of the belt you are replacing and compare it with P-696-8M-480. If the marking is not legible, measure the length and check the pulley profile, then send those details with your request.
- What should I send for a quote?
- Send the part number P-696-8M-480 by WhatsApp or email. If you want us to confirm the fit or suggest an equivalent, add the pulley tooth count, the belt width and the application.