V-belt Movendis P-5V900
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-5V900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-5V900 and any equivalents.
The Movendis P-5V900 is a narrow wedge V-belt in the 5V profile with a length of 2302 mm. Narrow wedge belts are common on industrial drives where a compact cross-section carries the load, including pumps, fans, compressors and process machinery. This page covers how to confirm the belt fits your drive before you order.
Confirming fit starts with the drive itself. Check the sheave groove profile against the 5V cross-section and measure the belt length along its back, then compare that figure with the 2302 mm listed here. If the old belt is still on the machine, read the marking printed on its back and match the profile and length to the P-5V900.
On multi-belt drives, replace the full set at once rather than mixing a new belt with worn ones. Belts that have run together take a set and wear as a group, so a single new belt on a used set can sit at a different tension and carry more than its share of the load. Inspect the sheaves at the same time for worn grooves, and check that the drive is aligned and the tension is set to the machine manufacturer's specification.
If the marking on the old belt is worn off or the drive has been modified, send us what you can read from the belt and the machine. We carry the Movendis narrow wedge line and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5V
- Length
- 2302mm
Frequently asked questions
- How do I confirm the P-5V900 is the right belt for my drive?
- Match the 5V profile to the sheave groove and the 2302 mm length to the belt you are replacing. The marking on the back of the old belt is the fastest reference if it is still legible.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. Belts that have run together wear as a set, so replacing the full set keeps tension and load sharing even across the drive.
- What should I send to request a quote?
- Send the part number P-5V900, the quantity, and any details from the old belt or the drive nameplate. A photo of the belt marking helps us confirm the match.