V-belt Movendis P-5V880
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-5V880 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-5V880 and any equivalents.
The Movendis P-5V880 is a narrow wedge V-belt with a 5V profile and a length of 2242 mm. It is intended for drives that call for a 5V cross-section, and the part number gives you a direct reference when ordering a replacement.
When matching this belt to the one being replaced, start with the marking on the old belt. Confirm the profile is 5V and the length is 2242 mm, then compare that against the P-5V880. If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section before ordering.
A narrow wedge V-belt like this one is often used in multiple-belt drives, so inspect the sheaves for wear, alignment and debris while the belt is off. If more than one belt runs on the same drive, replacing the full set keeps the load shared evenly across the grooves.
Send the part number P-5V880 by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt, include the old belt's marking or its profile and length, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5V
- Length
- 2242mm
Frequently asked questions
- How do I confirm the P-5V880 matches the belt I am replacing?
- Check the old belt for a 5V profile and a 2242 mm length, and compare it with the P-5V880. If the marking is worn off, measure the belt and note the cross-section before ordering.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, it is common practice to replace the full set so the belts share the load evenly. Inspect the sheaves at the same time for wear or misalignment.
- What information should I send with my quote request?
- Send the part number P-5V880. If you are not certain of the match, also include the old belt's marking or its profile and length so the team can confirm the right belt or suggest an equivalent.