V-belt Movendis P-5V730
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-5V730 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-5V730 and any equivalents.
The Movendis P-5V730 is a narrow wedge V-belt with a 5V profile and a length of 1862 mm. The 5V profile identifies the belt's cross-section, while the 1862 mm length is the datum length you can use to match an existing drive. This page gives maintenance, engineering and purchasing teams the key details to confirm the belt before requesting a quote.
When selecting a replacement, start with the profile and length. The 5V profile places this belt in the narrow wedge family, and the 1862 mm length is the reference dimension to compare against the belt currently on the drive. If the old belt's back is still legible, read the marking and compare it with P-5V730. If the marking is worn, measure the existing belt and confirm the drive's sheave groove profile matches 5V.
The P-5V730 is supplied by Movendis, a brand we carry. For an accurate quote, send the part number P-5V730, the quantity you need, and any details from the drive nameplate or the old belt. If you are unsure whether this is the correct belt, our team can help confirm the right belt or suggest an equivalent based on the information you provide.
Before ordering, inspect the drive for worn sheaves, misalignment or damaged belts. Replacing belts in sets on multi-belt drives helps maintain even load sharing. If the drive uses a matched set, include that in your request so we can help you confirm the correct quantity and part number.
Dimensions
- Section
- 5V
- Length
- 1862mm
Frequently asked questions
- What do the 5V profile and 1862 mm length mean for this belt?
- The 5V profile defines the belt's cross-section as a narrow wedge V-belt. The 1862 mm length is the datum length to compare with your existing belt and drive setup.
- How do I confirm the P-5V730 is the right belt for my drive?
- Check the marking on the back of the old belt and compare it with P-5V730. If the marking is not readable, measure the old belt and confirm the sheave groove profile matches 5V. You can also send us the drive details and we will help confirm.
- What information should I send to request a quote?
- Send the part number P-5V730, the quantity required, and any relevant drive or old belt details. If you need help identifying the belt, include photos or measurements so we can assist.