V-belt Movendis P-5V710
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-5V710 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-5V710 and any equivalents.
The Movendis P-5V710 is a narrow wedge V-belt in the 5V profile with a length of 1822 mm. It is built for industrial drives where a 5V cross-section is specified. Use the markings and measurements below to confirm it matches the belt you are replacing.
To match this belt, start with the belt on the drive. Read the marking on the back: it should show the 5V profile and the length. If the old belt is worn or the marking is gone, measure the outside length and compare it to 1822 mm. The P-5V710 is the part number to order when the drive calls for a 5V belt at that length.
Check the sheave grooves as well. A 5V narrow wedge V-belt seats in a 5V groove, and the groove width should match the belt cross-section. If the old belt is stretched, glazed or cracked, replace it before it damages the sheave. For drives with multiple belts, replace all belts at the same time so the load stays even.
The Movendis P-5V710 is supplied by MR Industrial Accessories LLC. To request a quote, send the part number P-5V710 by WhatsApp or email. If you are unsure about the profile or length, include the marking from the old belt and a photo of the drive; the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5V
- Length
- 1822mm
Frequently asked questions
- How do I confirm the Movendis P-5V710 is the right belt for my drive?
- Check the old belt for a 5V marking and a length that matches 1822 mm. If the marking is unreadable, measure the belt and compare it to the 1822 mm length. You can also send a photo of the drive and the old belt marking to MR for confirmation.
- Can I replace just one belt on a multi-belt drive?
- For drives with multiple belts, replace all belts at the same time. Mixing a new belt with worn belts can cause uneven loading and shorten belt life.
- What information should I send with my quote request?
- Send the part number P-5V710. If you are not certain, include the marking from the old belt, the sheave groove profile and a photo of the drive. The team will confirm the belt or suggest an equivalent.