V-belt Movendis P-5V570
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-5V570 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-5V570 and any equivalents.
The Movendis P-5V570 is a narrow wedge V-belt in the 5V profile with a length of 1452 mm. It is the belt to reach for when the marking on the old belt reads P-5V570 and the drive calls for a 5V cross-section.
Start at the belt itself. Remove it and read the stamping on the back: the part number, the profile and the length are usually printed there, though heat and wear can make them faint. If the P-5V570 marking is legible, that is the cleanest identification you can hand to a supplier. If it is not, measure the cross-section and the outside length and send those along with a photo of the old belt.
The 5V profile is a narrow wedge cross-section, and 1452 mm is the length for this part number. Both values need to match the drive before the belt goes on. A belt of the same profile but a different length will not tension correctly, and a belt of the same length in a different profile will not sit properly in the sheaves.
When you request a quote, include the part number P-5V570, the quantity, and the equipment or drive it runs on. A photo of the back of the old belt helps confirm the marking. We carry Movendis narrow wedge V-belts and the team replies by WhatsApp or email to confirm the belt or suggest an equivalent.
Dimensions
- Section
- 5V
- Length
- 1452mm
Frequently asked questions
- What does the marking on a P-5V570 belt tell me?
- The stamping on the back of the belt carries the part number, which identifies the 5V profile and the 1452 mm length. If the marking matches P-5V570, that is the belt to order.
- What should I send for a quote on this belt?
- Send the part number P-5V570, the quantity you need, and a photo of the old belt marking if you have one. The team replies by WhatsApp or email to confirm the belt or suggest an equivalent.
- Can I replace a 5V belt with a different profile?
- No. The 5V profile and the 1452 mm length both have to match the drive. Use the part number on the old belt to confirm the profile and length before ordering.