V-belt Movendis P-5V1180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-5V1180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-5V1180 and any equivalents.
The Movendis P-5V1180 is a narrow wedge V-belt with a 5V profile and a length of 2997 mm. When replacing a belt, matching the profile and length on the old belt is the first step. This page helps you confirm the P-5V1180 against the belt you are removing.
To match the P-5V1180, read the marking on the back of the belt you are replacing. The profile should be 5V and the length should be 2997 mm. If those two values match, the P-5V1180 is the correct narrow wedge V-belt for that drive position. Check the belt for wear such as cracking, glazing, or missing ribs, and inspect the sheaves for damage before installing a new belt.
If the old belt is unmarked or the marking is worn off, measure the length and compare it to the 2997 mm specification. The 5V profile indicates a narrow wedge cross-section. Do not substitute a different profile or length without confirming it will fit the drive. For drives with multiple belts, replace all belts in the set at the same time to maintain even tension and load sharing.
When requesting a quote, send the part number P-5V1180 and the quantity you need. If you are unsure whether this is the right belt, send the marking on your old belt or the drive specifications. Our team can confirm the profile and length and help you identify the correct replacement.
Dimensions
- Section
- 5V
- Length
- 2997mm
Frequently asked questions
- How do I confirm the P-5V1180 matches my old belt?
- Check the marking on the back of your old belt. If it shows a 5V profile and a 2997 mm length, the P-5V1180 is the matching narrow wedge V-belt. If the marking is not visible, measure the belt length and compare it to 2997 mm.
- What should I send to get a quote for the P-5V1180?
- Send the part number P-5V1180 and the quantity you need. If you want us to verify it against your application, include the marking on your old belt or the drive details.
- Can I replace just one belt in a multi-belt drive?
- For drives using multiple belts, it is best to replace all belts in the set at the same time. This helps maintain even tension and load sharing across the drive.