Timing belt Movendis P-536-8M-370
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-536-8M-370 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-536-8M-370 and any equivalents.
The Movendis P-536-8M-370 is a curvilinear H-type timing belt with an HTD 8M profile, a 536 mm length and an 8 mm pitch. When you are matching a belt to the one being replaced, these three values are the ones to check first.
Start with the belt you are removing. Read the marking on the back: it should show the profile, the length and the part number. The P-536-8M-370 is identified by its HTD 8M profile and 536 mm length, so a belt marked with a different profile or length is not the same item.
If the old marking is worn or missing, measure what you can and compare it with the drive. Confirm the profile against the pulley grooves and the length against the drive layout. The pitch of 8 mm is part of the profile designation, so it does not need to be measured separately once the profile is known.
Send us the part number, or the profile and length you read from the old belt, by WhatsApp or email. We carry the Movendis P-536-8M-370 and can confirm it against your application or suggest an equivalent where the exact item does not suit the drive.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 536mm
Frequently asked questions
- How do I confirm the P-536-8M-370 is the belt I need?
- Check the marking on the back of the belt you are replacing. The profile should be HTD 8M and the length 536 mm. If the marking is unreadable, compare the profile with the pulley grooves and the length with the drive layout.
- What information should I send for a quote?
- Send the part number P-536-8M-370, or the profile and length from the old belt, along with the equipment it fits. A photo of the back marking helps if the text is faded.
- Can you suggest an equivalent if this belt does not match?
- Yes. Send the details of the belt being replaced and the drive it runs on. We will review the profile and length and suggest a suitable equivalent where one is needed.