Timing belt Movendis P-535-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-535-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-535-5M-480 and any equivalents.
The Movendis P-535-5M-480 is a curvilinear H-type timing belt with an HTD 5M profile, a 535 mm length, and a 5 mm pitch. This page is for maintenance and purchasing teams who need to match an existing belt exactly. Use the steps below to confirm the part number on the belt you are replacing.
Start by reading the marking on the back of the old belt. You should find the part number P-535-5M-480, or at least the profile and length. If the marking is worn, measure the belt width and count the teeth; the profile HTD 5M and the 535 mm length are the key dimensions to match. The 5 mm pitch is the distance from tooth center to tooth center.
Once you have the part number, send it to us by WhatsApp or email. Our team can confirm that the P-535-5M-480 is the correct belt for your drive or suggest an equivalent if needed. We carry the Movendis line and can help you verify the profile and length before you order.
If you are replacing multiple belts on the same drive, it is good practice to replace them as a set and to inspect the pulleys for wear. Check that the new belt seats properly in the grooves and that the tension is set according to your equipment manual. A timing belt that is too loose or too tight can affect performance and belt life.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 535mm
Frequently asked questions
- How do I confirm the P-535-5M-480 is the right belt for my application?
- Check the marking on the back of your old belt. If it reads P-535-5M-480, or if the profile is HTD 5M and the length is 535 mm, this belt matches. You can also send us the part number and photos of the old belt for verification.
- What should I include when requesting a quote?
- Send the part number P-535-5M-480, the quantity you need, and any details about the drive or equipment. If you are unsure about the part number, include the profile and length from the old belt.
- Can I replace just one belt on a multi-belt drive?
- For timing belt drives, it is generally recommended to replace all belts on the same drive at the same time to maintain even tension and wear. Inspect the pulleys and replace any that show signs of wear.