Timing belt Movendis P-3264-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-3264-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-3264-D/8M-180 and any equivalents.
The Movendis P-3264-D/8M-180 is a double-sided timing belt in the Curvilinear series, built to drive from both faces of the belt. It is identified by its part number and its 3264 mm length. This type of belt is used where a single drive must turn two shafts in opposite directions or where the belt must engage pulleys on both sides.
Double-sided timing belts are common in reversing drives, twin-shaft arrangements and compact assemblies where space limits the number of belts. The teeth on both faces mesh with pulleys on either side, so the belt can transmit motion to two locations at once. Confirm that your drive uses a double-sided profile before ordering.
To verify fit, read the marking on the back of the old belt and compare it to P-3264-D/8M-180. Measure the length only if the marking is unreadable, and match the 3264 mm length exactly. Check the pulley grooves for wear and make sure the belt path allows teeth to engage on both sides.
When you request a quote, send the part number, the quantity and a photo of the belt marking if possible. Our team can confirm the profile and length from the number you provide. If you are replacing more than one belt on the same drive, include all part numbers so we can help you keep the set consistent.
Dimensions
- Length
- 3264mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the part number on the back of the belt you are replacing. If it matches P-3264-D/8M-180, that is the belt to quote. Also check that the drive uses a double-sided timing belt with teeth on both faces.
- What does the 3264 mm length refer to?
- It is the length of the belt as listed by the manufacturer. Match this number to your old belt or to the drive specification. Do not substitute a different length without checking the pulley center distance.
- Can you help if I am not sure about the part number?
- Yes. Send a photo of the marking on the belt and the drive details. We will compare it to the Movendis P-3264-D/8M-180 and help you confirm the correct belt.