Timing belt Movendis P-3264-8M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-3264-8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-3264-8M-450 and any equivalents.
The Movendis P-3264-8M-450 is a curvilinear H-type timing belt with an HTD 8M profile, a 3264 mm length, and an 8 mm pitch. When you read the marking on the back of the old belt, this is the exact part number that identifies it. If the marking is worn or missing, the profile and length are the key details to confirm before ordering.
The back of a timing belt usually carries the part number, profile, and length. On this belt, the marking will show P-3264-8M-450, along with HTD 8M and 3264 mm. If the printing is still legible, that is the most direct way to match a replacement. If only part of the marking remains, note the profile and length and compare them with the drive.
The HTD 8M profile and 3264 mm length define the fit on the pulleys. This is a curvilinear H-type timing belt, which means the teeth are rounded rather than trapezoidal. When the old belt is removed, check the pulleys for wear and confirm the belt sits correctly in the grooves. A belt that is too long or too short will not tension properly, so the length must match the original specification.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 3264mm
Frequently asked questions
- How can I identify the correct replacement belt?
- Read the marking on the back of the old belt. The Movendis P-3264-8M-450 is identified by its part number, HTD 8M profile, and 3264 mm length. If the marking is unreadable, measure the length and check the profile against the pulleys.
- What does the 8M profile mean on this belt?
- The 8M indicates an HTD profile with an 8 mm pitch. This is a curvilinear H-type timing belt, so the teeth are rounded. The profile must match the pulley grooves for proper engagement.
- What information should I send to request a quote?
- Send the part number P-3264-8M-450, or if you do not have it, the profile and length from the old belt marking. Photos of the belt and the drive can also help confirm the correct item.