Timing belt Movendis P-1568-8M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1568-8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1568-8M-450 and any equivalents.
The Movendis P-1568-8M-450 is a curvilinear H-type timing belt with an HTD 8M profile. It measures 1568 mm in length with an 8 mm pitch. When you are replacing a worn belt, matching these three values to the belt you remove is the first step.
Start by reading the marking on the back of the old belt. The part number, profile and length should correspond to HTD 8M, 1568 mm and 8 mm pitch. If the old belt is worn or the marking is no longer legible, measure the length along the belt and confirm the profile against the pulley grooves before ordering.
This belt is built to the curvilinear H-type tooth shape that fits HTD 8M pulleys. A belt with the wrong profile or pitch will not seat correctly in the grooves, so the profile and pitch must match the drive. The 1568 mm length positions the belt correctly on the pulleys and maintains the intended take-up.
If you are unsure whether the P-1568-8M-450 is the right replacement, send the part number from the old belt, the profile and the length by WhatsApp or email. We carry the Movendis line and can help confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1568mm
Frequently asked questions
- How do I confirm the P-1568-8M-450 matches my drive?
- Check the marking on the old belt for the profile and length. The P-1568-8M-450 is HTD 8M with a 1568 mm length and 8 mm pitch. If the marking is unreadable, measure the length and compare the tooth profile to the pulleys.
- What information should I send for a quote?
- Send the part number P-1568-8M-450, or the marking from the old belt, by WhatsApp or email. If you have the profile and length, include those as well. We reply promptly to confirm the belt or suggest an equivalent.
- Can I replace just one belt on a multi-belt drive?
- On drives with more than one belt, replacing all belts at the same time helps keep tension and load sharing even. If you are replacing a single belt, confirm the profile, pitch and length match the others on the drive.