Timing belt Movendis P-1560-T10-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Metric Tooth Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1560-T10-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1560-T10-450 and any equivalents.
The Movendis P-1560-T10-450 is a metric tooth timing belt with a T10 profile, a 1560 mm length and a 10 mm pitch. We carry this belt for maintenance and MRO work. Before you fit it, inspect the drive and sheaves so the new belt runs true.
Check the sheaves for worn grooves, burrs or debris that can damage the belt teeth. Confirm the shafts turn freely and the bearings are sound. Misalignment or a bad bearing will shorten the life of any timing belt.
Verify the old belt marking against the P-1560-T10-450: T10 profile, 1560 mm length and 10 mm pitch. If the drive uses more than one belt, replace the full set so the load stays even.
Send the part number P-1560-T10-450 by WhatsApp or email for a quote. If you are unsure, send a photo of the belt back and the drive sheaves, and we will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 1560mm
Frequently asked questions
- What does the P-1560-T10-450 fit?
- This belt is a T10 profile timing belt with a 1560 mm length and 10 mm pitch. It is selected by matching the profile and length to your drive.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt and compare it to the P-1560-T10-450. Check the profile T10, length 1560 mm and pitch 10 mm.
- What should I inspect before fitting a new belt?
- Inspect the sheaves for wear or damage, check shaft alignment and bearing condition, and make sure the drive is clean. Replace belts in sets if the drive uses more than one.