Timing belt Movendis P-1344-D/3M-180

MOVENDIS P-1344-D/3M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1344-D/3M-180 and any equivalents.

The Movendis P-1344-D/3M-180 is a curvilinear double-sided timing belt with a 1344 mm length, part of the Movendis Curvilinear Double-Sided Timing Belts series. It drives from both faces, so it suits layouts where two shafts run off opposite sides of the same belt. Send us the part number and we will quote it.

Before you fit this belt, inspect the drive. Check both sheave faces for wear, scoring or a polished track that shows the belt has been slipping. Look at the grooves for embedded debris and confirm the flanges are not bent or rubbing. A worn sheave will shorten the life of any new belt, so correct it first.

Check alignment and tension as well. Misalignment between the two shafts will pull a double-sided belt to one side and wear the edges. Confirm the take-up or tensioner moves freely and that the bearings on both driven shafts turn without play or roughness. If the old belt failed early, the cause is usually in the drive rather than the belt.

When you replace a double-sided timing belt, note the part number from the back of the old belt and compare it with the marking on the new one. The P-1344-D/3M-180 carries a 1344 mm length. Send us that number by WhatsApp or email and our team will confirm the belt or suggest an equivalent.