Timing belt Movendis P-1344-14M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1344-14M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1344-14M-480 and any equivalents.
The Movendis P-1344-14M-480 is a curvilinear H-type timing belt with an HTD 14M profile. It measures 1344 mm in length and has a 14 mm pitch. This belt is used in industrial drives that require synchronous power transmission.
Before fitting a new belt, inspect the drive and sheaves. Check for worn grooves, misalignment, or damaged flanges that can shorten belt life. Verify that the sheave profile matches the HTD 14M profile of the P-1344-14M-480.
Confirm the belt length by reading the marking on the back of the old belt. The P-1344-14M-480 has a length of 1344 mm and a pitch of 14 mm. If the old belt is not readable, measure the drive center distance and sheave diameters to calculate the required belt length.
When replacing the belt, consider replacing all belts in the drive if multiple belts are used. This helps maintain even load distribution. For a quote, send the part number P-1344-14M-480 and any relevant drive details.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1344mm
Frequently asked questions
- What is the profile and length of the Movendis P-1344-14M-480?
- The belt has an HTD 14M profile and a length of 1344 mm. The pitch is 14 mm.
- How do I confirm the belt length?
- Read the marking on the back of the old belt. If it is not legible, measure the drive center distance and sheave diameters to calculate the required length.
- What should I check before installing this belt?
- Inspect the sheaves for wear, misalignment, and damaged flanges. Ensure the sheave profile matches the HTD 14M profile.