Timing belt Movendis P-1100-5M-480

MOVENDIS P-1100-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1100-5M-480 and any equivalents.

The Movendis P-1100-5M-480 is a curvilinear H-type timing belt with an HTD 5M profile, a 1100 mm length and a 5 mm pitch. To match it to the belt you are replacing, compare the marking on the old belt with these three values before you order.

Start with the profile. HTD 5M indicates a curvilinear tooth form in the 5 mm pitch family. If the old belt reads HTD 5M and measures 1100 mm in length, this belt matches those two points. If the old belt shows a different profile or a different length, this is not the correct replacement.

Next, check the belt itself rather than the drive. Read the marking printed on the back of the old belt and note the profile, the length and the pitch. The P-1100-5M-480 carries a 5 mm pitch, which must agree with the pulleys it runs on. A belt with the same length but a different pitch will not seat correctly in the pulley grooves.

If the marking is worn off, measure the old belt and confirm the tooth profile against the pulley. Send the part number P-1100-5M-480, or the profile and length you measured, by WhatsApp or email and our team will confirm the belt or suggest an equivalent.