Timing belt Movendis P-1098-D/3M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1098-D/3M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1098-D/3M-180 and any equivalents.
When a drive uses a double-sided timing belt, the marking on the back of the old belt is the fastest way to identify the correct replacement. This Movendis belt carries the part number P-1098-D/3M-180 and a length of 1098 mm. We carry this belt for maintenance and repair work.
Read the old belt before you remove it. The code P-1098-D/3M-180 identifies a Movendis curvilinear double-sided timing belt. The belt length is 1098 mm. Write down the full marking, including any prefix or suffix, and note the number of teeth on each pulley if the drive has more than one.
Double-sided timing belts are used where the drive needs power take-off from both faces. When you replace one, inspect the pulleys for worn teeth, check the tensioner and idler for play, and look for oil or debris in the drive. A belt that has run hot or frayed at the edges often points to a misaligned pulley or a failed tensioner.
If the marking is worn away, send us the drive details and any remaining numbers. For a quote on the Movendis P-1098-D/3M-180, contact MR Industrial Accessories by WhatsApp or email with the part number and the quantity you need. Our team can confirm the belt or suggest an equivalent from the data you provide.
Dimensions
- Length
- 1098mm
Frequently asked questions
- How do I identify a double-sided timing belt if the marking is gone?
- Measure the belt length and count the teeth, then note the pulley profile and the drive layout. Send those details along with any partial numbers to MR Industrial Accessories, and we can help match the belt.
- What does the part number P-1098-D/3M-180 tell me?
- It is the Movendis part number for this curvilinear double-sided timing belt. The belt length is 1098 mm. Use the full number when requesting a quote.
- Can I replace just one belt in a set?
- On drives with two or more belts, replace them as a set so the load is shared evenly. Inspect all pulleys and tensioners at the same time.