Timing belt Movendis P-1014-D/S3M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1014-D/S3M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1014-D/S3M-180 and any equivalents.
This Movendis belt is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series. It has a length of 1014 mm. Double-sided timing belts are used where a single drive must turn two shafts in opposite directions or transmit power from both faces of the belt.
To confirm fit, check that your drive uses a double-sided timing belt and that the required length matches 1014 mm. Compare the profile marking on the old belt with the part number P-1014-D/S3M-180. If the marking is worn or unreadable, measure the old belt and note the number of teeth and the tooth profile.
The part number and length are the key selection data for this belt. Because it is double-sided, both faces carry teeth, so it is not interchangeable with a single-sided timing belt of the same length. When ordering, provide the full part number P-1014-D/S3M-180 and the 1014 mm length.
Dimensions
- Length
- 1014mm
Frequently asked questions
- How do I confirm that the Movendis P-1014-D/S3M-180 is the right belt for my drive?
- Check that your drive requires a double-sided timing belt and that the length is 1014 mm. Compare the marking on your old belt with the part number P-1014-D/S3M-180.
- Can I replace a single-sided timing belt with this double-sided belt?
- No. A double-sided timing belt has teeth on both faces and is not interchangeable with a single-sided belt of the same length. Confirm that your drive is designed for a double-sided belt.
- What information should I send with my quote request?
- Send the part number P-1014-D/S3M-180 and the 1014 mm length. If you are replacing an existing belt, include the marking from the back of the belt and any photos of the drive.