V-belt Mitsuboshi SPB 5000
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPB 5000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 5000 and any equivalents.
This Mitsuboshi SPB 5000 is a narrow wedge V-belt with an SPB profile. The 5000 mm length and SPB profile are the two numbers to match when replacing a belt on a narrow-wedge drive.
The SPB profile is a narrow wedge section: 16.3 mm top width, 13 mm height and a 40° angle. Narrow wedge belts transmit more power in a smaller cross-section than classical V-belts, so the profile must match the pulley groove exactly. The 5000 mm length is the datum length for this belt. Confirm both the profile and the length against the marking on the old belt before ordering.
The same size is also listed under Stark SPB 5000 and Optibelt SPB 5000. If you are replacing a belt on a drive that takes this size, send us the part number and we will confirm the SPB 5000 or suggest an equivalent.
For a quote, send the part number SPB 5000, the quantity, and a photo of the belt marking if you have one. If the old belt is worn or the drive has multiple belts, tell us how many are on the drive so we can help you replace them as a set.
Dimensions
- Section
- SPB
Frequently asked questions
- What do the SPB and 5000 mean on this belt?
- SPB is the profile, a narrow wedge section with a 16.3 mm top width, 13 mm height and 40° angle. 5000 is the length in millimeters. Match both to the old belt.
- Can I use this belt if my old belt is marked SPB 5000?
- Yes. The SPB 5000 is the same profile and length. Send us the part number and we will confirm it for your drive.
- What should I send for a quote?
- Send the part number SPB 5000, the quantity you need, and a photo of the belt marking if you have one. If the drive uses multiple belts, tell us how many.