V-belt Mitsuboshi SPB 4750
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPB 4750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 4750 and any equivalents.
This Mitsuboshi SPB 4750 is a narrow wedge V-belt with an SPB profile and a 4750 mm length. It is built to the 16.3 mm top width, 13 mm height and 40-degree angle shown in the data. Use these figures to match it against the belt you are replacing.
The most reliable match is the marking on the old belt. Confirm the profile reads SPB and the length reads 4750 mm, then check the top width of 16.3 mm, the height of 13 mm and the 40-degree angle against the belt in hand. If the old belt is worn or the marking is gone, measure the top width and height and compare the length to the data here.
The same size is also listed under Stark SPB 4750 and Optibelt SPB 4750. That gives you another way to confirm the dimensions: if one of those part numbers is what you are replacing, this Mitsuboshi SPB 4750 follows the same size data. We carry the Mitsuboshi belt and can help confirm the right belt or suggest an equivalent.
Send the part number, the profile and the 4750 mm length, and any photos of the old belt marking, by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent. For drive inspection, check the pulleys and the belt path at the same time so the replacement goes on correctly.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check that the old belt is marked SPB and 4750 mm, then compare the top width of 16.3 mm, the height of 13 mm and the 40-degree angle. If the marking is unreadable, measure those dimensions and send them for confirmation.
- What should I send to request a quote for the Mitsuboshi SPB 4750?
- Send the part number SPB 4750, the profile SPB, the 4750 mm length and the quantity you need by WhatsApp or email. Photos of the old belt marking help the team confirm the right belt or suggest an equivalent.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark SPB 4750 and Optibelt SPB 4750, so you can use those part numbers to confirm the dimensions before ordering.