V-belt Mitsuboshi C 59
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 59 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 59 and any equivalents.
The Mitsuboshi C 59 is a classical V-belt with a C profile. Before fitting it, inspect the drive and sheaves to confirm the belt will run correctly.
Check sheave grooves for wear, rust, or debris that can shorten belt life. Verify that the sheave groove angle matches the belt's 40° angle and that the grooves are not worn beyond their original profile. Misaligned sheaves or excessive vibration will cause the new belt to wear quickly, so correct any issues before installation.
The C profile has a 22 mm top width and 14 mm height. Confirm that the sheave groove dimensions accept this profile and that the belt sits properly in the groove without bottoming out. If the old belt is worn or stretched, use its marking to identify the replacement. The C 59 marking indicates the profile and length, so match it exactly.
When replacing multiple belts on a drive, install a complete set of new belts at the same time. Mixing new and old belts can cause uneven tension and premature failure. After installation, check tension and re-tension after the initial run-in period. For a quote, send the part number C 59 and the quantity you need.
Dimensions
- Section
- C
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris. Verify the groove angle matches the belt's 40° angle and that the sheaves are aligned. Replace any worn sheaves before fitting the new belt.
- How do I confirm this is the right belt for my drive?
- Compare the belt marking on the old belt with C 59. Check that the sheave groove accepts a C profile belt with a 22 mm top width and 14 mm height.
- What information do I need to request a quote?
- Send the part number C 59 and the quantity you need. If you are replacing multiple belts on the same drive, include the total number required so we can quote a complete set.