V-belt Mitsuboshi C 57
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 57 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 57 and any equivalents.
This Mitsuboshi C 57 is a classical V-belt with a C profile. The profile and length are the two details that tell you whether it will sit correctly in the pulley groove and reach between the sheaves. Use them to match the belt you are replacing.
The C profile is a classical V-belt section with a 22 mm top width, a 14 mm height and a 40° angle. These dimensions are what a C-section pulley groove is cut to accept, so a belt marked C is the correct section for that drive. The 57 in the part number gives the length, and the belt is supplied in that length as listed.
When you are matching an old belt, read the marking on the back of the belt first. If it shows C 57, this is the same size. The same size is also listed under Optibelt C 57, so you can compare that listing if you are working from a different reference.
For a quote, send the part number C 57 and the quantity you need. If you are unsure whether a C-profile belt is right for the drive, send the belt marking or the pulley groove width and we can help confirm the section.
Dimensions
- Section
- C
Frequently asked questions
- What does the C profile mean on this belt?
- It is the classical V-belt section. This belt has a 22 mm top width, a 14 mm height and a 40° angle, which matches a C-section pulley groove.
- How do I confirm this is the belt I need?
- Check the marking on the back of the old belt. If it reads C 57, this is the same size. You can also measure the top width and height to confirm the C section.
- What should I send to request a quote?
- Send the part number C 57 and the quantity. If you are replacing a belt and the marking is unclear, send the old belt marking or the pulley groove dimensions and we can help confirm the right belt.