V-belt Mitsuboshi C 197

MITSUBOSHI C 197 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 197 and any equivalents.

The Mitsuboshi C 197 is a classical V-belt in the C profile, with a 22 mm top width, a 14 mm height and a 40 degree angle. The part number tells you the profile and the length, so it is the fastest way to confirm you are ordering the same belt that came off the drive.

Start with the profile. A C section belt is wider and deeper than an A or B section, so it seats in a larger sheave groove and carries heavier loads on the drives that use it. The 22 mm top width and 14 mm height given here are the dimensions to check against the groove before you order. The 40 degree angle is the standard V shape the belt presents to the sheave flanks.

Then read the marking on the back of the old belt. If it shows C 197, this is the size to quote. If the marking is worn or the belt has been replaced before with something else, measure the top width and the outside length and send those numbers along with the part number you found. The same size is also listed under Stark C 197, so you can note that when you compare what is on the shelf or on the machine.

For a quote, send the part number C 197, the brand Mitsuboshi, and the quantity you need. If the belt runs in a set on a multi-groove drive, tell us how many are on the drive so we can quote the full set and you can replace them together.