V-belt Mitsuboshi C 160
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 160 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 160 and any equivalents.
This Mitsuboshi C 160 is a classical V-belt with a C profile. It is used in industrial drives where a standard classical V-belt is specified. Confirm the replacement by matching the profile and the length marked on the old belt.
The C profile gives a 22 mm top width, a 14 mm height and a 40-degree angle. These dimensions identify the belt section. Check the drive sheave groove to ensure it takes a C section belt. Then compare the length marking on the old belt with the C 160 part number.
Classical V-belts like this are common on fans, pumps, compressors and other industrial machinery. When replacing, inspect the sheaves for wear and alignment. If the drive uses multiple belts, replace the full set so all belts share the load evenly.
The same size is also listed under Gates C 160. To request a quote, send the part number C 160 and the quantity you need by WhatsApp or email. If you are unsure of the profile, send a photo of the belt marking and the sheave.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm that the Mitsuboshi C 160 fits my drive?
- Check that the drive uses a C section belt and that the length matches the C 160 marking. The profile dimensions are 22 mm top width, 14 mm height and 40-degree angle.
- Can I replace just one belt in a multi-belt drive?
- It is best practice to replace all belts in a set at the same time. This keeps the load evenly distributed and helps avoid premature wear.
- What information should I send for a quote?
- Send the part number C 160 and the quantity you need. If you are unsure, include a photo of the belt marking and the sheave so we can help confirm the right belt.