V-belt Gates C 160
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 160 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 160 and any equivalents.
The Gates Hi-Power II C 160 is a classical V-belt with a C profile and a length of 4165.6 mm. The 40-degree angle, 22 mm top width and 14 mm height define how it seats in a standard C-section pulley groove.
When you select by profile and length, the C profile sets the groove width the belt is built for, while 4165.6 mm is the datum length you match to the drive. The 22 mm top width and 14 mm height confirm the cross-section, and the 40-degree angle is the included angle of the belt sides. If the old belt is worn or the marking is unreadable, measure the outside length and compare it with the C profile dimensions before ordering.
The same size is also listed under Mitsuboshi C 160, which gives you a second brand reference when you are cross-checking a replacement. For a quote, send the part number C 160 along with the brand, Gates, and the profile, C. If you are replacing a set, include the quantity and the drive position so the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 4165.6mm
Frequently asked questions
- What do the C profile and 4165.6 mm length mean for my drive?
- The C profile is the cross-section: 22 mm top width, 14 mm height and a 40-degree angle. The 4165.6 mm length is the datum length you match to the pulley spacing on the drive.
- How do I confirm this is the belt on my machine?
- Read the marking on the back of the old belt. If it shows C 160, this is the same size. If it is unreadable, measure the outside length and the top width, then compare with the C profile dimensions.
- What should I send to request a quote?
- Send the part number C 160, the brand Gates, and the profile C. For a set replacement, include the quantity and the drive position so the team can help confirm the right belt or suggest an equivalent.