V-belt Mitsuboshi C 144
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 144 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 144 and any equivalents.
The Mitsuboshi C 144 is a classical V-belt in the C profile, with a 22 mm top width, a 14 mm height and a 40 degree angle. This page covers how to match it against the belt you are replacing so the drive goes back together correctly.
Start with the marking on the back of the old belt. The C profile and the 144 length designation are what identify this belt, so compare them directly against the Mitsuboshi C 144 before you order. Confirm the 22 mm top width, the 14 mm height and the 40 degree angle against the belt in hand or the drive's own documentation.
If the old marking is worn or unreadable, measure the belt and check the drive sheave groove against the C profile dimensions. The same size is also listed under Stark C 144 and Optibelt C 144, so those markings may appear on a belt already in service on the same drive.
Send the part number, the profile and the length designation when you request a quote. We carry the Mitsuboshi C 144 and can confirm the belt against your application or suggest an equivalent.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the C 144 is the right belt?
- Read the marking on the back of the belt being replaced and match the C profile and the 144 length designation. Then check the 22 mm top width, 14 mm height and 40 degree angle against the belt or the drive documentation.
- What if the old belt's marking is no longer readable?
- Measure the belt and check the sheave groove against the C profile dimensions. Send what you have, and we can help confirm the right belt or suggest an equivalent.
- What should I send to request a quote?
- Send the part number, the profile and the length designation by WhatsApp or email. The team replies promptly and can confirm the belt against your application.