V-belt Mitsuboshi C 109
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 109 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 109 and any equivalents.
The Mitsuboshi C 109 is a classical V-belt with a C profile. It measures 22 mm across the top, 14 mm high, and has a 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true.
Start by locking out the drive. Check sheave grooves for wear, cracks, or embedded debris. A worn groove can let a new classical V-belt sit too deep and slip. Measure the groove width and compare it to the 22 mm top width of the C 109. Confirm the sheaves are aligned and the shafts turn freely.
Look at the old belt as you remove it. Note any glazing, cracks, or missing cords. If the drive uses multiple belts, replace them as a set so lengths match. The C 109 has a 14 mm height and a 40° angle. These dimensions must match the sheave groove for proper contact.
The same size is also listed under Gates C 109 and Optibelt C 109. When you request a quote, send the part number C 109 and the quantity. If you are unsure about the profile, send a photo of the marking on the back of the belt and the sheave dimensions.
Dimensions
- Section
- C
Frequently asked questions
- What are the dimensions of the Mitsuboshi C 109?
- It has a C profile, a 22 mm top width, a 14 mm height, and a 40° angle.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Gates C 109 and Optibelt C 109.
- What should I check before installing this belt?
- Inspect sheave grooves for wear and debris, verify alignment, and confirm the groove matches the 22 mm top width and 40° angle.