V-belt Mitsuboshi 5V 500
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 5V 500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 500 and any equivalents.
The Mitsuboshi 5V 500 is a narrow wedge V-belt built to the 5V profile. The profile and the 500 length are the two numbers that matter when you are matching a drive or replacing an existing belt.
The 5V profile is a narrow wedge section, so the belt sits deeper in the pulley groove than a classic V-belt of comparable top width. That is the fit you are checking when you read the marking on the back of an old belt or measure a drive that calls for a 5V section. The 500 length is the second number to confirm before you order, because a belt of the same profile but a different length will not tension correctly on the same drive.
If the belt on the machine is marked 5V 500, this Mitsuboshi belt matches that profile and length. The same size is also listed under Optibelt 5V 500 and Dayco 5V 500, so you can compare what is already on the drive against those listings. For drives that run more than one belt, replace the full set at the same time so the belts share the load evenly and wear at the same rate.
To request a quote, send the part number 5V 500 and the quantity you need by WhatsApp or email. If you are unsure whether 5V 500 is the right belt for the drive, include a photo of the marking on the old belt or the drive nameplate, and the team can help confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- 5V
Frequently asked questions
- What do the profile and length tell me on this belt?
- The 5V profile identifies the narrow wedge cross-section that fits the pulley groove, and 500 is the length. Both must match the drive for the belt to seat and tension correctly.
- Can I use this belt to replace an existing 5V 500?
- Yes. If the belt currently on the drive is marked 5V 500, this Mitsuboshi belt matches that profile and length. The same size is also listed under Optibelt 5V 500 and Dayco 5V 500.
- What should I send to get a quote?
- Send the part number 5V 500 and the quantity by WhatsApp or email. If you want the profile and length confirmed first, include a photo of the marking on the old belt or the drive nameplate.