V-belt Mitsuboshi 3VX 1060
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and MITSUBOSHI: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3VX 1060 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3VX 1060 and any equivalents.
The Mitsuboshi 3VX 1060 is a cogged narrow V-belt in the 3VX profile. Before you install a new belt, give the drive a quick inspection so the replacement runs true and lasts.
Check the sheaves first. Look for worn grooves, burrs, or polished sidewalls that can chew a new cogged narrow V-belt. Confirm the sheave grooves match the 3VX profile, and that the sheaves are aligned with each other. Misalignment is a common cause of short belt life.
Next, check the rest of the drive. Spin the sheaves by hand and feel for rough bearings or a wobble. Make sure the take-up or tensioner moves freely and has enough travel for the new belt. Clean the grooves so the belt seats properly. If the drive uses multiple belts, plan to replace them as a set.
The same size is also listed under Dayco 3VX 1060. We carry the Mitsuboshi 3VX 1060. To request a quote, send the part number by WhatsApp or email; the team replies promptly and can help confirm the right belt.
Dimensions
- Section
- 3VX
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear or burrs, confirm the grooves match the 3VX profile, and check alignment between sheaves. Spin the sheaves to feel for rough bearings, and verify the tensioner moves freely.
- How do I identify the belt on the machine?
- Read the marking on the back of the old belt. The part number 3VX 1060 identifies the profile and size. If the marking is worn, measure the top width and length of the old belt and send those details.
- What do I need to send for a quote?
- Send the part number 3VX 1060 by WhatsApp or email. If you are replacing an existing belt, include the marking from the back of the belt or the machine make and model.