V-belt Mitsuboshi 3V 355
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3V 355 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 355 and any equivalents.
The Mitsuboshi 3V 355 is a narrow wedge V-belt with a 3V profile and a length of 355 mm. To match it to the belt being replaced, confirm both the profile and the length on the old belt. This page covers what to check before you request a quote.
Start by reading the marking on the back of the belt you are replacing. The profile should read 3V, and the length should read 355. If the old belt is worn or the marking is unreadable, measure the length and compare it to the 355 mm value for this belt. A 3V profile with a different length is not the same belt, and a 355 length with a different profile is not either.
This belt is also listed under other brands in the same size: Stark 3V 355, Optibelt 3V 355, and Dayco 3V 355. If the belt you remove carries one of those markings, the Mitsuboshi 3V 355 is the same size. When you request a quote, send the part number 3V 355 and the quantity you need.
For drives that use multiple belts, replace all belts in the set at the same time. Mixing a new belt with worn belts can change how the load is shared. Before installing, inspect the sheaves for wear or damage and confirm the belt sits correctly in the groove.
Dimensions
- Section
- 3V
Frequently asked questions
- How do I confirm the Mitsuboshi 3V 355 is the right belt?
- Check the marking on the back of the belt you are replacing. It should show the 3V profile and the 355 length. If the marking is gone, measure the length and compare it to 355 mm.
- The old belt has a different brand marking. Is this the same size?
- The same size is also listed under Stark 3V 355, Optibelt 3V 355, and Dayco 3V 355. If your old belt carries one of those markings, the Mitsuboshi 3V 355 matches that size.
- What should I send to request a quote?
- Send the part number 3V 355 and the quantity you need by WhatsApp or email. If you are unsure about the profile or length, include a photo of the belt marking and the team can help confirm it.