V-belt Mitsuboshi 3V 335
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3V 335 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 335 and any equivalents.
This Mitsuboshi 3V 335 is a narrow wedge V-belt with a 3V profile and a 335 mm length. Narrow wedge belts are common on industrial drives where space is tight and speeds are higher than a classical V-belt would handle well.
If you are replacing a belt on a compact drive, the 3V profile is often the right cross-section. The 3V 335 gives you that profile in a 335 mm length. To confirm it fits, read the marking on the back of the old belt and compare the profile and length before ordering.
The same size is also listed under Stark 3V 335, Optibelt 3V 335 and Dayco 3V 335. If your drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves.
Send the part number, the marking from the old belt, or a photo of the drive and sheaves. We carry Mitsuboshi belts and can help confirm the 3V 335 or suggest an equivalent.
Dimensions
- Section
- 3V
Frequently asked questions
- How do I confirm the 3V 335 is the right belt for my drive?
- Check the marking on the back of the old belt. The profile should read 3V and the length should be 335 mm. If the marking is worn, measure the drive and send us the details.
- What should I send for a quote on this belt?
- Send the part number 3V 335, the brand you prefer, and the quantity. If you are not sure of the size, send the marking from the old belt or a photo of the drive.
- Can I mix this belt with another brand on the same drive?
- For drives with multiple belts, it is best to replace the full set with belts of the same size and brand. This keeps the load even across all the grooves.