MCGILL CCF 1/2 N S cam follower

McGILL CCF 1/2 N S belongs to cam follower, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CCF 1/2 N S and any equivalents.

The McGill CCF N S series is an inch-series cam follower: a roller bearing with a stud mount that runs against a cam, guide, or raceway. It provides a sturdy support wheel with sealing for reciprocating or traversing mechanisms. MR Industrial Accessories LLC supplies this line to customers across the United States and in several Latin American countries.

The part number breaks down into blocks: CCF denotes the inch-series cam follower family, the following number is the nominal roller diameter, N indicates the stud version, and S indicates the seal type. That is why CCF 1/2 N S and CCF 5/8 N S are both valid: only the roller diameter changes, not the series logic. To request a quote, send the complete part number exactly as it appears on the drawing or mechanism.

These followers are common in machine tool cams, conveyors, presses, packaging equipment, feeders, and linear motion guides. They also appear in metalworking and automotive operations and on production lines where a cam roller must turn on a raceway under radial load while holding the mechanism's position. As a wear part, it is replaced by part number when the raceway shows marks or the roller loses clearance.

For proper selection, review roller diameter, stud type, sealing, and internal clearance. The S seal guards against dust and lubricant loss, which matters in areas with chips or dirt. During mounting, verify stud alignment with the raceway, tighten the fastening, and ensure the cam does not strike the roller; misalignment shortens follower life more than load does. Use the lubricant specified for the operating temperature.

Across brands, inch-series cam followers interchange by part number and dimensions: roller diameter, stud diameter and length, raceway width, and seal type. A similar designation is not enough; compare the dimensional data sheet. If you have the original McGill part number or one from another brand, send it and we will cross-reference it with the CCF N S series to find the real equivalent.

To replace a cam follower or add this line to a machine, contact us via WhatsApp with the part number, roller size, or a photo of the part. The team at MR Industrial Accessories LLC responds promptly with the alternative that fits your mechanism and can suggest equivalents or help you choose.