LINK-BELT UBG2E32NL insert bearing
- Brand
- LINK-BELT
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT UBG2E32NL belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UBG2E32NL and any equivalents.
The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, built for mounting in split or pillow block housings to form a complete bearing unit. It suits equipment needing smooth rotation and straightforward alignment, such as conveyors, fans, and general plant machinery. MR Industrial Accessories LLC supplies this line and helps you select the right variant for your application.
Reading the 200 series part number is straightforward. The prefix UBG identifies the insert family, the digit 2 indicates the diameter series, and the following number—20 or 32 in UBG2E20NL and UBG2E32NL—gives the bore diameter. The suffix E denotes the standard design, NL specifies the shaft locking method, and any final characters mark sealing or groove options. This coding lets you pinpoint the exact part you need.
In industrial settings, this insert is common in belt conveyors, bucket elevators, mixers, blowers, and packaging lines. It also appears in aggregate processing, feed plants, and ventilation systems. Because the insert can be replaced without removing the entire housing, maintenance is faster during scheduled shutdowns.
To choose correctly, confirm your shaft diameter and the locking type—set screw, eccentric, or adapter—required by your housing. Evaluate the sealing: in dusty or wet environments, a variant with an additional seal is wise. During installation, clean the shaft, apply the specified grease, and check housing alignment to prevent axial loads. Tightening the set screws evenly helps extend service life.
Inserts in the 200 series are often interchangeable across brands by bore number and locking type, but not every sealing and outer ring combination is equivalent. Before swapping, compare inner ring width, groove position, and locking system. If unsure, send us the full part number and the current housing brand, and we will identify a compatible option.
MR Industrial Accessories LLC supplies the LINK-BELT line and manufactures split pillow block housings, roller chains, and sheaves. For insert UBG2E20NL, UBG2E32NL, or any other 200 series variant, contact us on WhatsApp with the part number or shaft dimensions, and we will quote promptly.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I identify the correct part number for a LINK-BELT 200 series insert bearing?
- The part number combines family letters, a series number, and a number for the bore diameter. Suffixes indicate locking and sealing. If uncertain, send the shaft diameter and a housing photo via WhatsApp, and we will help you identify it.
- Can this insert replace one from another brand in the same housing?
- Often yes, since the 200 series is a mounting standard. But verify locking type, inner ring width, and sealing. Provide the old insert's part number and housing dimensions, and we will suggest a compatible alternative.
- What lubrication and maintenance does an insert bearing need?
- Use a general-purpose ball bearing grease. Adjust greasing frequency based on environment severity and check seals at each shutdown. In dusty or humid conditions, shorten intervals. For demanding applications, ask about variants with reinforced seals.