LINK-BELT P3Y2E32N pillow block bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT P3Y2E32N belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P3Y2E32N and any equivalents.
A LINK-BELT pillow block with insert bearing arrives as a complete foot-mounted assembly: a cast iron housing plus the insert bearing. It holds, aligns and shields a rotating shaft in one unit, which makes installation on a bedplate straightforward. Conveyors, fans, mixers and process equipment commonly use this arrangement.
The part number breaks down into blocks. The first letter, P, stands for pillow block. The digits that follow give the insert size and series. Y describes the housing configuration, E covers the locking or sealing method, and N identifies the finish or variant.
Typical duties include belt and chain conveyors, bucket elevators, mixers, exhausters, mills and packaging lines. These units suit long shafts that need support at several points with compact, self-aligning housings. Food, chemical and cement plants also use them where dust, moisture or washdowns are present.
Selection starts with shaft diameter, load type and force direction. The insert tolerates a small amount of initial misalignment, yet the bedplate still needs to be flat and the bolts tightened correctly. Review the sealing: fine dust or liquids call for extra protection. Most inserts are lubricated for life, but in harsh conditions check the seal and the operating temperature.
Pillow blocks with insert bearings interchange across brands when the key dimensions line up: height to center, hole spacing, shaft diameter and locking type. LINK-BELT, Rexnord and similar lines often share these dimensions, so always confirm the full part number before replacing. A different sealing or locking variant can mean the housing will not match even when the bearing itself does.
To get a quote, send the part number from the component or drawing by WhatsApp or email. MR Industrial Accessories LLC replies promptly and can point out a compatible equivalent. We also help with assembly and lubrication questions based on your equipment and working environment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I read the part number on these pillow blocks?
- It identifies a pillow block with insert bearing. P means pillow block, Y the housing configuration, E the locking type and N the variant. The number relates to shaft diameter. Send the complete part number and we will quote it.
- Can another brand replace it?
- Yes, when the mounting dimensions match: height to center, hole spacing, shaft diameter and locking type. Many equivalent lines share these dimensions. Check the part number and dimensions before replacing. Send us the original part number and we will indicate a compatible alternative.
- What lubrication does the insert require?
- Most insert bearings are lubricated for life. Where dust, humidity or high temperatures are present, inspect the seal and monitor temperature. For severe conditions, contact us and we will advise on suitable protection.