LINK-BELT FB224M50H flange bearing 4 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- B22400
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT FB224M50H belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FB224M50H and any equivalents.
The LINK-BELT B22400 series is a four-bolt flange housing for mounted bearings. It bolts flat to a machine frame or wall, so it suits shafts that run parallel to a mounting surface and need firm, accessible support. MR Industrial Accessories supplies this series in a range of shaft sizes for industrial plants.
The code tells you what you are holding. B22400 is the flange housing family; the rest of the string carries the size and shaft diameter. Take FB224M40H: a B22400 flange housing for a 40 mm shaft. Change the digits and you move up or down the range — FB224M45H takes a 45 mm shaft. The M marks metric, and the trailing H identifies the housing configuration. Read the full code and there is no doubt about which part to order.
Plants choose these housings for conveyors, fans, mixers, centrifugal pumps and process equipment. Four-bolt flange mounting works well where the shaft sits parallel to a wall or bedplate and where you want a solid connection without machining the frame. You will find them in food and beverage operations, material handling, steel, cement, water treatment and agricultural machinery.
Selection starts with shaft diameter, then the load — radial, axial or combined. Make sure the flange has room for the four bolts and that the mounting face is clean and flat. The bearing's seal keeps out dust and moisture; in wet or dirty areas, review the seal type. Speed and temperature set the lubrication and internal clearance requirements. Aligning the housing carefully at installation pays off in service life.
Flange housings come from several brands, each with its own nomenclature. Equivalents to the LINK-BELT B22400 series often share shaft diameter and bolt pattern, but do not assume they swap without checking. Compare shaft diameter, bolt-hole spacing and center height before replacing anything. If you are unsure, send us the old code and we will identify a compatible alternative.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the code FB224M40H mean?
- It is a B22400 series flange housing sized for a 40 mm shaft. The M stands for metric and the H denotes the housing configuration. Give us that code and we can quote the exact part.
- How can I tell if this housing will replace the one I have?
- Check three dimensions: shaft diameter, distance between the flange bolt holes, and center height. If they match, compatibility is likely. Send us the code from your old part and we will help you confirm.
- Where are these housings used?
- They appear on conveyors, fans, mixers, pumps and process equipment in food, cement, water and steel plants. The four-bolt flange makes installation on bedplates and walls straightforward.