LINK-BELT F3CL2B35N flange bearing 3 holes

LINK-BELT F3CL2B35N belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F3CL2B35N and any equivalents.

A Link-Belt series 200 3-bolt flange bracket is a mounted bearing that bolts directly to a flat surface through three fastening points. It suits applications where a rotating shaft needs support with fixed alignment and access from the front, such as conveying, ventilation, or process equipment mounted on a wall or frame. MR Industrial Accessories supplies this line and can help you select the correct variant based on shaft diameter and fastening type.

The part number breaks down into meaningful blocks. F stands for flange. The following digit —3 in F3CL2B31N and F3CL2B35N— tells you how many fastening bolts are used. CL identifies the flange bracket family, 2 points to the bearing series (series 200), and the trailing B and N letters differentiate sealing and housing configurations. The final digits (31, 35) correspond to shaft diameter and bearing size. The full part number is what identifies the exact variant.

You will find these flanged brackets on belt conveyors, bucket elevators, mixers, blowers, and process lines in food, chemical, and aggregate plants. The three-bolt flange mounts to a flat face for good rigidity, and because the shaft sits perpendicular to the mounting plane, alignment can be repeated without extra parts. Installation and replacement are straightforward when the mounted bearing is used.

Selection starts with the shaft diameter and the part number on the equipment plate. Check the sealing type: B variants typically include seals that keep out dust and moisture, while N may denote a specific housing configuration. When mounting, set the flange on a clean, flat surface, tighten the three bolts in a cross pattern, and confirm the shaft turns freely. Lubrication and internal clearance come defined with the mounted bearing; your focus is alignment and cleanliness.

Flanged mounted bearings appear under various nomenclatures depending on the manufacturer, and crossovers based on series 200 are common. To replace a bracket, compare shaft diameter, bolt count and position, and sealing type. At MR Industrial Accessories, send us the original part number or the shaft and flange dimensions and we will identify the compatible alternative. The brand does not need to match for proper operation.

If you need the Link-Belt series 200 3-bolt flange bracket, send the complete part number on WhatsApp —for example F3CL2B31N or F3CL2B35N— or provide the shaft and flange dimensions. We will quote promptly, and if you are after another variant in the same family, we will source it or suggest an equivalent. MR Industrial Accessories answers technical questions about mounting and selection.