INA E40-XL-KRR-B y-bearing (insert bearing)

INA E40-XL-KRR-B belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for E40-XL-KRR-B and any equivalents.

The INA E-XL-KRR-B is an insert Y-bearing built to sit inside split or pillow block housings. It supports radial loads and allows for slight misalignment, so it suits shafts that are not perfectly straight. Set screws lock the inner ring to the shaft, and a double-lip seal keeps out dust and moisture. This makes the bearing a practical choice for agricultural, industrial and transport equipment.

Reading the code helps you confirm the right variant. The E marks the execution series, and the number that follows gives the shaft size in millimeters, as in E25-XL-KRR-B for a 25 mm shaft. XL points to the long-life version with higher load capacity. KRR describes the sealing: a double-lip contact seal that blocks dust and moisture. The final B refers to the inner ring design with set screws for shaft locking.

Typical installations include belt conveyors, bucket elevators, seeders, harvesters, bottling lines and ventilation systems. The bearing handles radial loads and a degree of misalignment, which is useful when the shaft deflects slightly inside a split housing. In food processing, check that the lubricant and seal materials match your hygiene requirements before installing.

Selection comes down to shaft diameter, load type (radial, axial or combined) and the working environment. The KRR seal gives good protection against contaminants, but in heavy dust or water you may want extra sealing or a different lubricant. Mount on a clean shaft with the correct tolerance, then tighten the set screws with the proper wrench so the inner ring is held firmly without being distorted. Housing alignment and internal clearance also affect how long the bearing lasts.

When replacing a Y-bearing, equivalents from other brands often come up. Main dimensions usually follow international standards, but sealing, load rating or locking method can differ. Always confirm the full part number and technical data before swapping parts. We can review interchangeability and suggest alternatives that fit your equipment.

For an INA E-XL-KRR-B Y-bearing, or to confirm which variant your application needs, send the part number or shaft dimensions by WhatsApp or email. Our team replies promptly and can help with equivalents and selection.