SKF YAR 206-103-2LPW/SS y-bearing (insert bearing)

SKF YAR 206-103-2LPW/SS belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for YAR 206-103-2LPW/SS and any equivalents.

The SKF YAR series Y-bearing is an insert with an extended inner ring and set screw locking, made to fit split plummer block or flanged housings. It suits equipment that needs a straightforward, sturdy bearing unit that is easy to replace. With its sealed design and the stainless steel /SS option, it works well in damp areas or where washdowns are frequent.

The code tells you most of what you need. YAR is the series of inserts with an extended inner ring and two set screws for shaft locking. The number after it (204, 205, 206, and so on) sets the size: a higher number means a larger shaft diameter and larger outside dimensions. Suffixes carry the details: 2LPW means a double low-friction seal, and /SS means stainless steel. So YAR 204-2LPW/SS is a 20 mm shaft insert with double seal and stainless steel construction, while YAR 206-103-2LPW/SS is a 1.3/16" shaft in stainless steel. Reading these codes lets you order the exact replacement.

Typical applications include conveyors, belts, elevators, mixers, industrial laundry equipment, and food and beverage plants, as well as any machine with rotating shafts that needs simple, reliable support. The stainless steel version resists corrosion, which makes it a fit for plants where hygiene calls for frequent washdowns. You will also find these inserts in agricultural equipment and packaging lines.

When selecting an insert, look at the shaft diameter, the load type (radial, axial or combined), and the environment. The YAR series with the 2LPW seal gives good protection against dust and moisture. At mounting, check that the shaft is clean and free of burrs, and tighten the set screws with the correct wrench so the inner ring does not turn on the shaft. Proper lubrication and careful alignment help extend service life. In corrosive settings, go with the /SS variant.

For equivalences, SKF YAR inserts can be interchanged with other brands of Y-bearings that share the same shaft diameter and locking arrangement. Always check the critical dimensions: bore diameter, overall width and the distance between screws. Nomenclature differs between makers, but codes based on shaft diameter (204, 205, etc.) usually line up. To replace safely, compare the dimensions of the original bearing with the new one.

MR Industrial Accessories supplies the SKF brand within its bearing line. If you need a quote for a YAR insert, send the complete code by WhatsApp or email and the team will reply promptly. They can also help if you are unsure about the designation or which version fits your application.