V-belt Gates XPZ775/3VX307
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPZ775/3VX307 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ775/3VX307 and any equivalents.
A narrow-profile V-belt from the Gates XPZ/3VX line runs in grooved pulleys to connect a motor with the driven machine. Its slim cross-section suits drives where room is tight, and the reinforced build helps it handle flexing and heat. Maintenance and purchasing teams use it in fans, pumps, compressors and other rotating equipment. MR Industrial Accessories quotes these belts by part number or by size.
The series carries two designations at once: XPZ and 3VX. The figure that comes after each one gives the belt length, counted in millimeters under XPZ and in tenths of an inch under 3VX. So XPZ562/3VX223 and XPZ575/3VX228 are matching sizes written in the two systems. The part after the slash, such as /3VX223, lets you trace the same belt under the 3V reference. Having both codes on hand simplifies ordering and cross-checking.
Typical installations include fans, pumps, compressors, mills, conveyors and machine tools, as well as refrigeration units and central air conditioning systems. Because the profile is narrow, these belts fit compact, high-speed drives where a classical section would need more space.
Selection starts from the power to be transmitted, the rotation speed and the pulley diameters. The drive needs pulleys with a matching groove, and misalignment speeds up wear. Belts are not lubricated, but the state of the bearings matters: a worn bearing throws the belt out of line. Check tension at regular intervals, since a slack belt slips and an over-tight one loads the bearings. Cleanliness and sealing around the drive also affect how long the belt lasts.
V-belts come under several brands and nomenclatures. A Gates XPZ/3VX belt can generally be replaced by an equivalent reference from another maker that follows the same standardized dimensions. Send us a competitor's part number or an unmarked belt and we will point you to the compatible equivalent. What has to match is profile, length and top width, not only the series letters.
To request a Gates XPZ/3VX V-belt, message us on WhatsApp with the part number or size. We quote promptly and help you confirm the correct reference, including equivalences with other brands, so workshops and plants can keep their drives running.
Dimensions
- Número de producto
- 9643-00775
Frequently asked questions
- What does the designation XPZ/3VX mean?
- XPZ and 3VX are two names for the same narrow-profile V-belt. The number after each one gives the length: millimeters in XPZ, tenths of an inch in 3VX. The same belt can therefore be ordered under either reference.
- How do I order a belt that has no part number?
- Measure the outside length, the top width and the profile height. With those figures and a photo we can identify the series and quote the equivalent belt. Bringing the old belt as a sample also works.
- What care extends the life of the belt?
- Keep the pulleys aligned and clean, set tension as the equipment manual indicates, and keep the belt away from oils and extreme temperatures. Check the bearings too: if they are worn, the belt runs out of alignment and wears faster.