V-belt Gates XPZ 775
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPZ 775 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 775 and any equivalents.
This is a Gates Quad-Power 4 cogged narrow V-belt in profile XPZ with a length of 775 mm. The profile and length are the two dimensions you need to match before ordering. Use the marking on the old belt to confirm both.
XPZ is a narrow V-belt profile, also called a wedge belt. The cogged construction is suited to compact drives where a standard wrapped belt would run hot or slip. The 775 mm length is the datum length for this belt, so any replacement must carry the same XPZ profile and the same 775 mm length to sit correctly in the pulley grooves.
When you read the back of the old belt, look for the profile and the length in millimeters. If the marking is worn, measure the outside length and check the pulley groove width against an XPZ section. Send the full part number, XPZ 775, and a photo of the marking if it is still legible. We carry the Gates Quad-Power 4 line and will confirm the belt against your drive details.
Dimensions
- Section
- XPZ
- Length
- 775mm
Frequently asked questions
- What do the profile and length mean on this belt?
- XPZ is the cross-section profile, a narrow V or wedge section. The 775 mm is the length. Both must match the old belt for the replacement to fit the pulleys and maintain the correct tension.
- How do I confirm the belt on my drive is this one?
- Read the marking on the back of the belt. It should show the profile and the length. If the marking is gone, measure the outside length and check the pulley groove against an XPZ section, then send us the details.
- What should I send to get a quote for the XPZ 775?
- Send the part number, XPZ 775, and the quantity you need. If you are replacing a set, include the number of belts on the drive. A photo of the old belt marking helps us confirm the profile and length.