V-belt Gates SPZ 2160 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 2160 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2160 MN and any equivalents.
This Gates SPZ 2160 MN is a narrow wedge V-belt from the Super HC MN series. It has an SPZ profile, a 2160 mm length, a 9.7 mm top width, an 8 mm height, and a 40-degree angle. Use it on drives that call for an SPZ profile and this length.
Narrow wedge V-belts like this SPZ 2160 MN are common on industrial drives where space is tight and speeds are higher than standard V-belt drives allow. The SPZ profile is a metric narrow section, so confirm the pulley groove is cut for SPZ and that the belt length matches the drive's required center distance.
To confirm fit, read the marking on the back of the old belt. If it shows SPZ and 2160, this belt matches. Also check the pulley grooves for wear and the belt for cracking or glazing. When a drive uses multiple belts, replace the full set at the same time so the load stays even.
For a quote, send the part number SPZ 2160 MN, the quantity, and a photo of the belt marking or the drive nameplate. If you are unsure of the profile or length, include the pulley diameters and the center distance, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 2160mm
Frequently asked questions
- How do I confirm this SPZ 2160 MN belt fits my drive?
- Check the old belt marking for SPZ and 2160. Verify the pulley grooves are for an SPZ profile and measure the drive center distance if needed. If in doubt, send us the marking and pulley details.
- Can I replace just one belt on a multi-belt drive?
- No. On a drive with multiple belts, replace the full set at once so all belts share the load evenly and wear at the same rate.
- What information do you need to quote this belt?
- Send the part number SPZ 2160 MN, the quantity, and any photos of the belt marking or drive nameplate. If you need help confirming the profile or length, include pulley diameters and center distance.