V-belt Gates SPZ 2150
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 2150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2150 and any equivalents.
This Gates Super HC SPZ 2150 is a narrow wedge V-belt with an SPZ profile and a 2150 mm length. It is used in industrial drives where a compact, high-capacity belt is needed, such as pumps, fans, compressors and machine tools. Confirm fit by matching the profile and length to your existing belt.
The SPZ profile is a narrow wedge section with a 9.7 mm top width, 8 mm height and 40-degree angle. Narrow wedge belts like this one suit drives that need more power in less space than a classic V-belt. The 2150 mm length is the datum length for this belt, so check that your drive accepts that length before ordering.
To confirm fit, read the marking on the back of the old belt. It should show the profile and length, for example SPZ 2150. If the marking is worn, measure the top width and the outside length of the belt and compare them with the values above. Also inspect the pulley grooves for wear and check that the belt sits correctly in the groove.
When you request a quote, send the part number SPZ 2150 and the quantity you need. If you are replacing a set, include the number of belts on the drive so we can help you match the set. The same size is also listed under Optibelt SPZ 2150, which you can use as a reference when checking your old belt.
Dimensions
- Section
- SPZ
- Length
- 2150mm
Frequently asked questions
- How do I confirm that this SPZ 2150 belt fits my drive?
- Check the marking on your old belt for SPZ 2150. If it is not readable, measure the top width and the outside length and compare them with the 9.7 mm top width and 2150 mm length listed for this belt. Also make sure the pulley grooves are in good condition.
- What does the SPZ profile mean for my application?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height and 40-degree angle. It is used in industrial drives where a compact belt with higher power capacity than a classic V-belt is needed.
- Can I use this belt to replace an Optibelt SPZ 2150?
- The same size is also listed under Optibelt SPZ 2150. If your old belt is marked Optibelt SPZ 2150, this Gates Super HC SPZ 2150 is the same profile and length. Send us the part number and quantity for a quote.