V-belt Gates SPZ 1737 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1737 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1737 MN and any equivalents.
This Gates Super HC MN belt is a narrow wedge V-belt with the SPZ profile and a 1737 mm length. The profile and length are the two numbers that matter when you are matching a belt to a drive, so start there.
The SPZ profile gives you a 9.7 mm top width and an 8 mm height, with a 40 degree angle. That profile is what seats in the pulley groove, so confirm it against the old belt before you order. The 1737 mm length is the datum you compare against the marking on the belt you are replacing.
If the existing belt is worn or the marking is unreadable, measure the length and check the top width and height. Send the part number SPZ 1737 MN, or those dimensions, and we will confirm the belt or suggest an equivalent. We carry Gates belts and serve maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
For a quote, send the part number SPZ 1737 MN by WhatsApp or email. If you have the old belt in hand, include the profile and length from its back, plus the top width and height if they are legible. That is enough for us to match it to this Gates Super HC MN belt.
Dimensions
- Section
- SPZ
- Length
- 1737mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The SPZ profile is the cross-section that fits the pulley groove: 9.7 mm top width, 8 mm height and a 40 degree angle. The 1737 mm length is the belt's length. Together they are the two dimensions you match to the drive.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The profile should read SPZ and the length should match 1737 mm. If the marking is worn, measure the top width and height and compare them to 9.7 mm and 8 mm.
- What should I send to get a quote?
- Send the part number SPZ 1737 MN by WhatsApp or email. If you are not sure of the number, send the profile and length from the old belt, or its top width and height, and we will confirm the match or suggest an equivalent.