V-belt Gates SPZ 1700 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1700 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1700 MN and any equivalents.
This Gates SPZ 1700 MN belt is a narrow wedge V-belt from the Super HC MN series. To match it to the belt you are replacing, compare the profile and the length marked on the old belt with the SPZ profile and 1700 mm length of this one.
The SPZ profile is a narrow wedge section, and this belt measures 1700 mm in length, 9.7 mm across the top, 8 mm in height, and has a 40° angle. These figures let you check the belt against the drive before ordering. Read the marking on the back of the belt you are removing: it should show the profile and length. If it reads SPZ and 1700 mm, this belt matches those two key dimensions.
When you send a quote request by WhatsApp or email, include the part number SPZ 1700 MN and, if possible, the old belt's marking. Our team can confirm the belt or suggest an equivalent. For drives using multiple belts, replace all belts in the set at the same time and check sheave wear and alignment as part of the same job.
Dimensions
- Section
- SPZ
- Length
- 1700mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Compare the profile and length on the old belt's back marking with the SPZ profile and 1700 mm length of this belt. Also check the top width of 9.7 mm, height of 8 mm, and 40° angle if you can measure them.
- What should I send to request a quote?
- Send the part number SPZ 1700 MN, the quantity, and any details from the old belt's marking. If you have a photo of the drive or the old belt, include it so we can help confirm the match.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On drives that use more than one belt, replace the full set together and inspect the sheaves for wear and alignment. Mixing new and used belts can affect how the drive runs.