V-belt Gates SPZ 1337 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1337 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1337 MN and any equivalents.
The Gates SPZ 1337 MN is a narrow wedge V-belt in the Super HC MN series. When you are replacing a belt, the marking on the old belt is the fastest way to match it. This page covers what to check before you request a quote.
Start with the belt you are removing. Read the marking on the back of the old belt and compare it to the part number above. The profile is SPZ, the length is 1337 mm, the top width is 9.7 mm, the height is 8 mm and the angle is 40 degrees. Those values are the match points.
If the old belt is worn or the marking is gone, measure the length and check the profile against the drive. A narrow wedge V-belt in SPZ profile with a 1337 mm length is what this part number identifies. Do not substitute a different profile or length without confirming the drive will accept it.
When you send your request, include the part number Gates SPZ 1337 MN, the quantity and the equipment it fits. If you are unsure, a photo of the old belt and the drive sheaves helps us confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1337mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Read the marking on the back of the old belt. If it matches Gates SPZ 1337 MN, this is the same belt. If the marking is unreadable, check the profile and length against the drive.
- What are the dimensions of this belt?
- It is an SPZ profile narrow wedge V-belt, 1337 mm long, 9.7 mm top width, 8 mm height and 40 degrees angle.
- What should I send to get a quote?
- Send the part number Gates SPZ 1337 MN, the quantity you need and the equipment it fits. If you have a photo of the old belt or the drive, include it so we can help confirm the match.