V-belt Gates SPZ 1270 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1270 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1270 MN and any equivalents.
The Gates SPZ 1270 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile, a 1270 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. Read the marking on the back of your old belt to confirm these values before ordering.
The marking on a worn belt is often the fastest way to identify a replacement. Look for the profile and length on the back of the belt. On this Gates belt, the marking shows SPZ and 1270 mm. The top width is 9.7 mm, the height is 8 mm and the angle is 40 degrees. If the marking is worn or missing, measure the outside length and the top width to compare with these figures.
This is a narrow wedge V-belt, also called a narrow V-belt. It is built for drives that need a compact cross-section. The SPZ profile is one of the narrow wedge profiles. Use the profile and length together to match the belt to the pulley groove and the drive center distance. A belt with the same profile but a different length will not fit correctly.
When you request a quote, send the full part number: Gates SPZ 1270 MN. If you are replacing more than one belt on the same drive, note the quantity so the set can be matched. You can send the marking from the old belt by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1270mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look on the back of the belt for the profile and length. For this Gates belt, the marking shows SPZ and 1270 mm. Also note the brand and series if present.
- What if the marking on my belt is worn off?
- Measure the outside length and the top width of the old belt. Compare them with the 1270 mm length and 9.7 mm top width of this belt. Send those measurements with your request.
- What do I need to send for a quote?
- Send the part number Gates SPZ 1270 MN and the quantity you need. If you have the old belt, a photo of the marking helps confirm the profile and length.