V-belt Gates SPZ 1087 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1087 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1087 MN and any equivalents.
This Gates SPZ 1087 MN belt is part of the Super HC MN series, a narrow wedge V-belt. It is built for industrial drives where a compact profile and precise length matter. The SPZ profile and 1087 mm length make it a direct fit for specific pulley setups.
Narrow wedge V-belts like this SPZ 1087 MN are commonly used in space-constrained drives, such as those on pumps, fans, and compressors. The 40° angle and 9.7 mm top width allow it to seat properly in SPZ pulleys. With an 8 mm height, it transmits power efficiently in high-speed, small-diameter pulley applications.
To confirm fit, check the old belt's marking for the profile and length. The SPZ profile indicates a top width of 9.7 mm and an angle of 40°. The length of 1087 mm is the datum length; verify this matches your drive's requirement. If the marking is worn, measure the top width and outside length, or consult your drive documentation.
When replacing, inspect all pulleys for wear, alignment, and proper groove profile. A worn pulley can quickly damage a new belt. If multiple belts are used on the drive, replace them as a set to ensure even load distribution.
Dimensions
- Section
- SPZ
- Length
- 1087mm
Frequently asked questions
- What does the SPZ profile mean?
- SPZ is a narrow wedge V-belt profile with a 9.7 mm top width, 8 mm height, and 40° angle. It fits SPZ pulleys.
- How do I confirm this belt fits my drive?
- Check the old belt's marking for SPZ and 1087. If unreadable, measure the top width (9.7 mm) and datum length (1087 mm) or refer to your drive's specification.
- Can I replace just one belt in a multi-belt drive?
- It is best practice to replace all belts in a set at the same time to maintain equal tension and load sharing.