V-belt Gates SPZ 1080 MN

GATES SPZ 1080 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1080 MN and any equivalents.

The Gates SPZ 1080 MN is a narrow wedge V-belt from the Super HC MN series, supplied by MR Industrial Accessories LLC. Its profile is SPZ, its length is 1080 mm, its top width is 9.7 mm, its height is 8 mm and its angle is 40 deg. If you are replacing a belt on an existing drive, the marking on the back of the old belt is the first thing to read.

A narrow wedge V-belt is normally identified by its profile and its length, and both are printed on the back of the belt. On this belt you are looking for SPZ and 1080 mm. Write down the full string you find, including any series letters, because two belts can share a profile and a length and still differ in construction. Photograph the marking and the belt itself before you remove it, and note how many belts run on the drive.

Once you have the marking, match it against the SPZ 1080 MN: profile SPZ, length 1080 mm, top width 9.7 mm, height 8 mm, 40 deg angle. If the number on the old belt is worn, illegible or has been painted over, send us the marking you can still read together with the drive details. Our team replies to quote requests by WhatsApp or email and can help confirm the right belt or suggest an equivalent.

Where a drive carries more than one belt, replace the full set at the same time so the belts share the load evenly. Check the sheaves for wear, grooves for debris and the drive for correct alignment before fitting new belts, and keep the old marking on file for the next replacement.