Skip to main content
All products
Gates Predator narrow wedge V-belt · GATES SPBP 3800
V-belt Gates SPBP 3800

GATESBrand We Carry

V-belt Gates SPBP 3800

Manufacturer part numberSPBP 3800Also known as: SPBP3800
Brand
GATES
Subcategory
V-belts
Section
SPB
Series
Predator
Get a quote for SPBP 3800 on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

GATES SPBP 3800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPBP 3800 and any equivalents.

The Gates Predator SPBP 3800 is a narrow wedge V-belt with an SPB profile and a 3800 mm length. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.

Check sheave grooves for wear, cracks, or embedded debris. Worn grooves let a new belt sit too deep, which leads to slip and heat. Confirm sheave alignment with a straightedge or laser so the belt tracks without side loading. Look for oil, grease, or dust that can contaminate the belt and cause early failure.

Verify the old belt marking and measure its length. This belt has a top width of 16.3 mm, a height of 13 mm, and a 40-degree angle. If the drive uses multiple belts, replace them as a set so lengths match and load is shared. Tension the belt according to the drive manufacturer's specification, then recheck after the first run-in period.

To request a quote, send the part number SPBP 3800 by WhatsApp or email. Our team replies promptly and can help confirm this belt fits your drive or suggest an equivalent.

Dimensions

Section
SPB
Length
3800mm

Frequently asked questions

What should I check on the drive before installing this belt?
Inspect sheave grooves for wear, cracks, or debris, and confirm sheave alignment. Clean any oil or dust from the drive area. Correct any misalignment or worn grooves before fitting the new belt.
Can you help me confirm this belt is correct for my application?
Yes. Send the part number SPBP 3800 and details of your drive by WhatsApp or email. We will help confirm the fit or suggest an equivalent.
What are the dimensions of the Gates Predator SPBP 3800?
It is a narrow wedge V-belt with an SPB profile, a 3800 mm length, a top width of 16.3 mm, a height of 13 mm, and a 40-degree angle.
Get a quote for SPBP 3800 on WhatsApp
Quote on WhatsApp