V-belt Gates SPBP 3750
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Predator
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPBP 3750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPBP 3750 and any equivalents.
The Gates SPBP 3750 is a Predator narrow wedge V-belt with an SPB profile and a 3750 mm length. The 16.3 mm top width, 13 mm height, and 40-degree angle identify a wedge belt built for compact, high-load drives. Use the profile and length to confirm this belt fits your drive before you request a quote.
The SPB profile is a narrow wedge section, so the belt sits deeper in the pulley groove and transmits more load than a classic V-belt of similar width. The 3750 mm length is the datum you match against the drive. Check the old belt's back marking for the profile and length, or measure the drive to confirm both values. The 40-degree angle and 16.3 mm by 13 mm cross-section are part of the SPB profile, so any SPB belt you compare will share them.
When you replace a narrow wedge belt, inspect the pulleys for wear, alignment, and debris before installing the new belt. If the drive runs multiple belts, replace them as a set so the load stays even across the grooves. The Predator series from Gates is a narrow wedge V-belt, and this SPBP 3750 is one specific size within it.
To get a quote, send the part number SPBP 3750, the profile SPB, and the length 3750 mm by WhatsApp or email. If you are unsure whether this is the right belt, include a photo of the old belt's back marking and the drive setup. We can confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 3750mm
Frequently asked questions
- What do the profile and length tell me about the Gates SPBP 3750?
- The SPB profile is a narrow wedge section with a 16.3 mm top width, 13 mm height, and 40-degree angle. The 3750 mm length is the size you match to your drive. Together they identify the belt's cross-section and running length.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the old belt and compare the profile and length. If the marking is unreadable, measure the drive and check the pulley groove for an SPB section. Send those details and we can help confirm.
- What should I send to request a quote?
- Send the part number SPBP 3750, the profile SPB, and the length 3750 mm by WhatsApp or email. If you have a photo of the old belt's back marking or the drive, include it so we can verify the size.